Currency:Now In: Ignition → Power Commander - Quick Shifter PCV - PUSH Type Shift Rod Sensor M6/M6
Power Commander - Quick Shifter PCV - PUSH Type Shift Rod Sensor M6/M6
Push Type Sensor
6mm x 1.0 Threads
Requires Shift Rod (Not Included)
Quick Shifter sensors allow for incredibly fast and precise full throttle clutchless upshifting on many motorcycles. This specific unit REQUIRES a Power Commander V (Not PCIIIUSB), and reprogramming of your PCV module for proper operation.
Normally during "up shifting" you must roll off of the throttle and pull in the clutch in order to engage the next higher gear. In racing (both drag and road race), split seconds count. Rolling off the throttle, even slightly, slows your times and can be the difference between winning and losing. The Dynojet Quick Shifter (DQS) allows full throttle, clutch less shifting. This is done by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch.
The Power Commander V incorporates all of the Quick Shifter functionality in with the main fuel controller and is fully programmable*. No cutting or splicing of your bike's wiring harness is necessary. The amount of "kill time" is adjustable by the user via the provided software. The user can also set a minimum rpm for the system to function. This keeps the system from activating at too low of an rpm, such as low speed road riding.
*Note: Certain bikes require an ignition module for Quick Shifter functionality.
Shift Rod Pressure/Tension Sensor - This universal sensor mounts inline with the shift rod. The customer must provide the appropriate "length and thread" shift rod. This sensor is available in both "push" and "pull" styles depending on the direction the shift rod moves during an up shift. For most applications, a Shift Rod Kit is available.
Great video explaining how a Quickshifter works from Dynojet: